« AnteriorContinuar »
components, if any, should not be replaced and the reasons therefore. The listings returned to GSA are to serve as the basis for issuing RFP's for a Governmentwide replacement program. When last contacted GSA indicated that complete returns had not been made by Federal agencies and the RFP's had not yet been prepared.
As indicated above, the major using agencies are following divergent and inconsistent paths on plug-to-plug procurements. There is little or no evidence of any activity on non plug-to-plug where potential savings are much greater.
COMMON FACILITY FOR FOREIGN AFFAIRS COMMUNITY
Mr. STAATS. I would like to turn to some other areas that we have been interested in in the ADP field; in the prepared statement for example, we cite as an example a recommendation for the establishment of a common data processing facility in the foreign affairs community. This we feel could be useful not only as a matter of economy but also supplying to AID, USIA, and the State Department common information which all three are acquiring separately today. There is activity going on in this front but it has been very, very slow. But we do cite this case as an important example of what can be done through common use of a data processing systems.
REVIEWS BEING MADE OF COMPUTER SYSTEMS
In the prepared statement we cite several governmentwide reviews of the management of computers and related communications systems. These are all in process currently. We list four specific areas there, Mr. Chairman. I won't take the time to read them. But in the prepared statement we point out several other areas. Some 20 projects having governmentwide implications where we are concerned with the use of ADP equipment.
In the prepared statement we point out that in several agencies we have some 20 additional surveys and reviews primarily directed to evaluating specific ADP systems used by individual Government agencies or their contractors, and then in the defense area our efforts here have been directed more toward specific requests of the House Committee on Appropriations, primarily the degree of management control exercised over the computer systems within the Defense Department. We have a number of studies of this type which are set forth in the prepared statement.
USE OF SMALLER MANUFACTURERS
Then finally, in conclusion, the results of our reviews, we believe, Mr. Chairman, support your committee's recommendation that GSA should make it possible for smaller manufacturers of ADP equipment to furnish part of the Government's requirements. Specifications should not be designed around the products of certain companies, which would have the effect of eliminating competition and stifling the incentive of the smaller manufacturers.
LEGAL RESPONSIBILITY OF GSA
As we know, your recommendations that GSA take action to accomplish this objective fits in with GSA's responsibilities in the field of ADP equipment procurement as established by law.
We cite here a Comptroller General's decision of November 1967, by the way, in support of the idea that GSA, under the law, does have the authority, exclusive, to procure all Government general purpose ADP equipment and related supplies and equipment for use by all Government agencies.
We think that this places in the hands of the GSA a very, very important and very powerful instrument to effect economies in this area.
This concludes the statement and I hope I haven't abbreviated it too much.
Chairman PROXMIRE. Well, thank you very much, Mr. Staats. (The prepared statement of Mr. Staats follows:)
PREPARED STATEMENT OF HON. ELMER B. STAATS
Mr. Chairman and Members of the Committee; as requested in your letter of June 1970, my statement today will cover certain matters as they relate to:
inventory practices with respect to Government-owned automatic data processing (ADP) equipment, including equipment furnished to contractors, and
the need for procurement specifications which will afford free and full competition to all qualified potential bidders, including the small manufac
turers of peripheral equipment. The United States Government is the world's largest user of automatic data processing equipment. Billions of dollars have already been invested by Federal agencies in efforts to develop and install computers and computer systems for use in Government operations.
The number of electronic computers in use by Government agencies has increased greatly in recent years. These computers have doubled in numbers and cost since 1965. The number of Government computers in use has increased from 2,412 installed in 1965 to approximately 5,000 expected to be installed in 1970. Also, annual cost has increased from a little over $1 billion in 1965 for in-house use of computers to over $2 billion in 1970, exclusive of military operational and intelligence systems.
REPORTS TO THE CONGRESS Overall reports are issued from time to time to provide the Congress with information on some of the broader management problems relating to ADP systems, which require attention if improvements are to be achieved in the efficiency and economy with which these systems are employed. Seven reports of of this type have been previously submitted to the Congress. These are as follows:
Survey of Progress and Trend of Development and Use of Automatic Data Processing in Business and Management Control Systems of the Federal Government as of December 1957 (B-115369, June 27, 1958)
Review of Automatic Data Processing Developments in the Federal Government (B-115369, December 30, 1960)
Study of Financial Advantages of Purchasing over Leasing of Electronic Data Processing Equipment in the Federal Government (B-115369, March. 6, 1963)
Review of Problems Relating to Management and Administration of Electronic Data Processing Systems in the Federal Government (B-115369, April 30, 1964)
Management of Automatic Data Processing Facilities in the Federal Government (B-115369, August 31, 1965)
Maintenance of Automatic Data Processing Equipment in the Federal Government (B-115369, April 3, 1968)
Study of the Acquisition of Peripheral Equipment for use with Automatic Data Processing Systems (B-115369, June 24, 1969)
GOVERNMENT INVENTORY PRACTICES REGARDING ADP EQUIPMENT Several of these reports contain comments on the need for central information regarding the Government's ADP resources. At the time of our initial study in
this field, we found that there were no procedures in operation for collecting data on Government agency ADP resources and planned acquisitions. Therefore, as part of the first Government-wide survey of progress and trends of development and use of ADP in the Federal Government, we collected data on ADP resources from Federal agencies. These data were published in our first survey report to the Congress in June 1958, which presented, as of December 31, 1957, the first Government-wide inventory report of ADP equipment.
Subsequently, in order to avoid unnecessary duplication of effort, it was agreed among representatives of our Office, the staff of the House Post Office and Civil Service Committee, and the Bureau of the Budget (now the Office of Management and Budget) that the Bureau would undertake to regularly collect this kind of information. By its Bulletin No. 60–4, dated October 9, 1959, and subsequent revisions over the years, the Bureau prescribed reporting procedures to be followed by executive agencies in rendering annual reports on ADP equipment.
The data collected under these procedures have been published annually from 1960 through 1966.
Public Law 89–306 dated October 30, 1965, was enacted to improve methods of purchase, lease, maintenance, operation, and utilization of the Government's ADP equipment. The implementation of this law was facilitated in April 1967 by the Bureau of the Budget's issuance of Circular A-83 which prescribed a management information system for Government-wide use. The law assigned to GSA responsibility for operating and maintaining the system and to BOB responsibility for fiscal and policy control.
The inventory information collected under these procedures has been published for fiscal years 1968 and 1969.
Although the executive agencies have been and are now required to submit information on their computer resources in accordance with BOB Circulars A-55 and A-83, our reviews have shown that the reporting system does not necessarily produce the accurate, complete, and useful information that is necessary to facilitate the making of proper management decisions on procure. ment and the utilization of ADP resources.
Our current review of the General Services Administration (GSA) Government-wide management information system for data processing shows that certain changes have been made to the reporting system which should contribute to an improved system. These changes, however, do not provide for the inclusion of certain information in the data bank or for refinements which we believe are necessary for the efficient management of the Government's ADP resources. Improvements could be made with regard to the following matters.
There is a need for realistic and timely projections of acquisitions and releases of ADP equipment by the Federal agencies to improve reutilization efforts—to provide assistance for use in Government-wide contract negotiations and also to prevent unneeded ADP purchases.
There is also a need for inclusion of information regarding software and its use in Government operations—to reduce duplication of effort and
unnecessary costs. During our current review, we found that the management information system still did not provide accurate and timely reports, as we reported earlier, and that, as a result, agencies had made only limited use of the system.
We were told by some Federal agencies that little use had been made of the management information system because the system lacked current and reliable information. For example, computer printouts of the June 30, 1969, reports were not available to GSA until December 15, 1969, and distribution of copies of these reports to the agencies was not made until February 20, 1970.
POTENTIAL SAVINGS AVAILABLE BY THE ACQUISITION OF PERIPHERAL EQUIPMENT
FROM INDEPENDENT PERIPHERAL MANUFACTURERS During our recent study of the maintenance practices of Federal agencies, B-115369, April 3, 1968, we noted a few instances where aggressive managers saved their activities significant sums of money by not purchasing ADP system components and repair parts from the computer manufacturers but by purchasing the items directly from the actual manufacturers of the components and parts or from other sources of supply.
The officer in charge of the U.S. Fleet Numerical Weather Facility pointed out to us that, because the Facility maintained its own equipment, it was in a position to determine the best method of procurement and that this led to the purchase of components and parts from the manufacturer of the component rather than from the Main Frame computer manufacturer.
For example, the Facility made two negotiated procurements of drum-storage devices and related controllers from the actual manufacturers of the components and parts. Equivalent equipment from the computer manufacturer could have cost an additional $475,200 computed as follows: Purchase No. 1: Computer manufacturer's price
$530, 000 Drum manufacturer's price--
Computer manufacturer's price..
845, 500 419, 800
425, 700 The examples found during our maintenance study suggested to us that there was a possibility for Government agencies to achieve significant savings or other benefits through using procurement procedures which would provide for direct procurement of certain computer components and spare parts from original manufacturers or alternative sources of supply rather than relying on solesource procurement from computer manufacturers. We conducted a separate study of this matter and issued our report on the Study of the Acquisition of Peripheral Equipment for Use with Automatic Data Processing Systems on June 24, 1969 (B-115369).
The study pointed out that it is common practice for Government ADP managers to obtain all required ADP equipment from computer systems manufacturers even though certain items of equipment can be procured more economically from the original manufacturers or from alternate sources of supply.
We identified selected computer components that are directly interchangeable (plug-to-plug compatible) with certain other systems manufacturers' components and are available at substantial savings. We found that a number of private organizations had installed available equipment of this type and had achieved substantial savings. Yet we found only a few instances where Federal agencies had availed themselves of this economical means of acquiring computer components. We expressed the belief that central agency leadership could provide impetus for achieving similar savings in the Federal Government.
We estimated that, if plug-to-plug compatible components were rented from independent manufacturers rather than from systems manufacturers, annual savings would amount to at least $5 million. We estimated also that, if such components were to be purchased, they could be purchased for $23 million less from the component manufacturers than from the systems manufacturers.
We also expressed the belief that, in addition to the estimated savings in acquiring plug-to-plug compatible components, savings are available in the acquisition of non-plug-to-plug components from sources other than the systems manufacturers. We estimated that the purchase cost of such components-now being leased for about $50 million a year—from the systems manufacturers would be about $250 million where as the acquisition price for similar components from an alternative source of supply probably would be about $150 million--a difference of about $100 million.
One of the problems associated with the use of non-plug-to-plug components involves the compatibility of components with the main computer system. In this regard, the state of the computer industry today is such that, with the exception of plug-to-plug compatible peripheral devices, components cannot generally be directly interconnected with other manufacturers' components or systems. In this respect, both an electronic and a software interface generally have to be provided before the equipment can be interconnected.
A solution to this problem, which is now being considered by the industry, is the possibility of standardizing the interface media between peripheral equipment and the central processing unit. Interface standardization would stimulate competition in the peripheral equipment industry and would allow the user to select the peripheral equipment best suited to its requirements.
To this end, the United States of America Standards Institute, a privately supported organization acting as the national clearinghouse and coordinating agency for voluntary standards in the United States, has created a committee to consider the feasibility and practicality of input/output interface standardization.
Although the committee has been in operation since early 1967, progress has been slow in accomplishing desired objectives.
We believe that the development of a standard interface will promote industry competition and result in certain economies. It will provide the users with increased flexibility in the selection and use, regardless of the manufacturer, of those components best suited to achieve the desired objectives. Under such circumstances, the users will be in a better position to match system specifications with available equipment.
It is our view that, if an industrywide standard cannot be established in the near future, the National Bureau of Standards should be directed to develop a Federal standard interface program in order to achieve the significant savings which should result from increasing the compatibility of major components with Main Frame equipment. We have been advised that the Bureau of Standards has been handicapped by a shortage of funds in this area. We recommend that the Congress take steps to improve funding to the Bureau of Standards to promote this extremely important program.
The report contained the recommendations that:
The head of each Federal agency take action to implement steps requiring replacement of leased components that can be replaced with more economical plug-to-plug compatible units.
T'he Bureau of the Budget and the General Services Administration provide more specific guidelines for the evaluation and selection of plug-to-plug compatible equipment and of other components.
Pending the issuance of specific policies, the factors described in the report be used by Federal agencies to evaluate sources of ADP equipment, and
Inasmuch as third-party leasing arrangements generally result in savings when compared with rental arrangements available from equipment manufacturers, the head of each Federal agency consider this method of procure
ment when purchase of the equipment is determined not to be advantageous. In September 1969, our report was given specific consideration by top Federal ADP managers at a conference on the selection and procurement of computer systems by the Federal Government. The conference, conducted at the Federal Executive Institute by the Bureau of the Budget, was attended by officials of agencies which were major users of ADP systems in the Federal Government. The report of the conference, which summarized the consensus of the participants, contained the following statement:
"Leased peripheral equipment components in systems now installed should be replaced by components available from independent peripheral manufacturers or other sources, if it is determined that such components are comparable, compatible, reliable, less expensive, and can be adequately maintained. Similar consideration should be given when adding to or modifying existing systems. These determinations should be made on a case-by-case basis in consideration of the particular circumstances that exist."
On February 2, 1970, the Bureau of the Budget issued its Bulletin No. 70-9 on the acquisition of peripheral components for installed ADP systems. The bulletin requires Federal agencies to review and make decisions on whether leased peripheral components in computer systems supplied by the system manufacturer should be replaced with less costly equipment available from independent manufacturers of peripheral equipment or other sources. Some agencies have completed their reviews and have made replacements which have already resulted in substantial savings to the Government. For example, in the case of the Veterans Administration (VA), a cost reduction of $1.5 million will be realized over the next 5 years by replacing 75 tape drives with less costly equipment supplied from a small manufacturer of peripheral equipment.
Before concluding, I would like to make a few comments regarding our current and planned audit work in the ADP area.
Because of the widespread and increasing use of computers by Government agencies, the General Accounting Office conducts continuing reviews of specific ADP systems in Federal agencies and of related management problems. Reports to the Congress relating to specific ADP systems used by individual Government agencies or their contractors are issued where we find unnecessary costs, losses, or other adverse effects of significance.