Seismic Analysis and Design of Retaining Walls, Buried Structures, Slopes, and EmbankmentsTransportation Research Board, 2008 - 137 páginas This report explores analytical and design methods for the seismic design of retaining walls, buried structures, slopes, and embankments. The Final Report is organized into two volumes. NCHRP Report 611 is Volume 1 of this study. Volume 2, which is only available online, presents the proposed specifications, commentaries, and example problems for the retaining walls, slopes and embankments, and buried structures. |
Contenido
Final Report | 1 |
Chapter 3 Problems and Knowledge Gaps | 18 |
Analytical Methodologies | 26 |
Chapter 5 Seismic Ground Motions | 35 |
Chapter 6 HeightDependent Seismic Coefficients | 55 |
Chapter 7 Retaining Walls | 68 |
Chapter 9 Buried Structures | 105 |
Chapter 10 Recommendations for Future Work | 131 |
Appendices | 137 |
Otras ediciones - Ver todas
Términos y frases comunes
AASHTO AASHTO LRFD Bridge acceleration active analysis anchored applied approach appropriate areas assumed average basis block buried structures CEUS Chapter charts cohesion conducted considered correlations criteria culvert deformations described determine developed discussed displacement earth pressure earthquake effects Engineering equation estimating evaluation example existing factor failure feet Figure forces ft wall Geotechnical ground motion height Highway internal involved limit equilibrium lining LRFD Bridge Design M-O equations maximum methodology methods MSE walls nail NCHRP needed Newmark noted occur parameters passive percent performance period pipe potential practice presented problems procedures Project racking range ratio recommended records Reinforced relative Report Research response retaining walls rigid rock scattering seismic coefficient seismic design seismic loading shaking shape shear shown sliding slopes and embankments soil Specifications spectral stability static strain studies suggested summarized Table tion types typically values wave